Two pumps can both say “1 HP” on the box, and one can cost ten times the other. A basic self-priming 1 HP unit with a pressure switch is listed at ₹2,891, including GST, on a B2B marketplace. A 1 HP pressure booster from a national brand carries an MRP of ₹27,950. Horsepower is not what you are paying for.
Short answer: Booster pump price in India run from about ₹3,000 for a basic 1 HP unit to ₹28,000 or more for a branded one with a tank and controller. Multistage pressure boosting systems for apartments start around ₹1.5 lakh. Flow rate (litres per minute) and head (metres of lift) set the price far more than the HP label does.
What you actually pay for
A pump’s motor rating tells you how much power it draws. It doesn’t tell you how much water it moves or how high it pushes it. Two numbers do that.
Flow rate is how much water you need at once. A shower and a tap running together need roughly 15 to 25 litres per minute. A 20-flat building at peak morning use needs several thousand litres per hour.
Head is how much pressure the pump adds, measured in metres of water. Ten metres of head is about 1 bar. Each floor of a building needs roughly 3 metres, and pipe friction eats another 15 to 20 percent.
So when a shop quotes “1 HP, ₹4,000,” ask one question: what flows at what head?
Pressure booster pump price by flow rate and head
These are indicative ranges for 2026, built from live listings and the market rates we see in quotations. Treat them as a starting point, not a quote.
| Use case | Typical flow | Typical head | Power | Indicative price (₹) |
| Single bathroom, low pressure | 10–25 LPM | 8–10 m | 0.1–0.25 HP (inline) | 5,000–15,000 |
| 2–3 bathrooms, villa or independent house | 25–50 LPM | 25–35 m | 0.5 HP | 13,000–26,000 |
| Large house, terrace tank feed | 35–80 LPM | 30–45 m | 1 HP | 3,000–28,000 |
| Small hotel, hostel, clinic | 80–200 LPM | 35–50 m | 1.5–3 HP | 25,000–60,000 |
| Apartments, commercial | 200–1,000+ LPM | 40–70 m | 5 HP and above, duty and standby | 1.5–8 lakh+ (multistage booster sets) |
| Hospitals, dialysis, and ward blocks | 150–600 LPM | 40–60 m | Duty and standby | Quote-based (hospital water systems) |
Real reference points for the lower rows:
- A small inline home booster from an international brand is listed at ₹10,900 after a discount from ₹20,000.
- One national brand’s 0.5 HP range runs from ₹13,225 for a compact model to ₹26,075 for a tank-fitted model.
The upper rows are our estimates from project quotations. They vary widely with pump brand, controller, and whether you need a standby pump.
1 HP booster pump price in India
The 1 HP category has the widest price spread, so here is what sits behind it.
₹3,000 to ₹6,000: Basic aluminium-body self-priming pumps. A typical basic 1 HP unit is rated for about 2,000 L/h at 20 m head. It works for lifting water or a modest boost, but it lacks the tank and noise control that an always-on booster needs.
₹10,000 to ₹20,000: Mid-range units with a pressure tank, controller, and better motor windings.
₹20,000 to ₹28,000+: Branded units with stainless steel hydraulics and dry-run protection. A branded 1 HP unit with a 24-litre tank, for example, gives up to 7,000 L/h and 36 m head.
Honest view: for a home with three or more bathrooms, the cheapest 1 HP pump is a false saving. It cycles on and off constantly, the seal wears out, and the noise irritates you long before the pump dies. Buy on the flow-and-head curve, not on the sticker.
Booster pump price in Telangana
Booster pump price in Telangana follows the national MRP. Pumps don’t cost more because you live in Hyderabad, Warangal or Karimnagar. Your final bill differs for other reasons:
- GST at 18%. Confirm whether the quoted price includes it. The basic 1 HP listing above shows ₹2,450 plus ₹441 GST.
- Dealer margin. Branded pumps often sell 10 to 25 percent below MRP through local dealers. Ask.
- Water source. Borewell water in many Telangana localities is hard and silty. A pump with an aluminium impeller wears faster there, so stainless steel hydraulics earn their extra cost. If your TDS is high, fix the water first with a water softener or one of Hydromo’s water treatment plants, or scale will shorten pump life whatever you paid for it.
- Building type. Hyderabad’s gated communities and high-rises mostly need multistage variable-speed sets, not the household units most online guides talk about. Builders planning water supply usually size the booster alongside the STP for apartments, since both depend on the same daily water demand.
The costs nobody puts in the quote
The pump is often only 60 to 70 percent of the total. Budget for these:
- Installation and plumbing: ₹1,500 to ₹6,000 for a home, depending on pipe changes and a non-return valve.
- Pressure tank or controller: ₹2,000 to ₹6,000 if not bundled.
- Electricals: a dedicated MCB and proper earthing. Skipping these voids most warranties.
- Running cost: a 1 HP motor draws about 0.75 kW. At ₹7 per unit and 30 minutes of daily use, that is roughly ₹80 a month. Small, but a badly sized pump runs far longer.
- Service: Seals and capacitors need replacing every two to three years with heavy use.
How to size a pump without overpaying
1. Count outlets used together. Showers need about 8 to 10 LPM each. Add them up.
2. Add head. Floors × 3 m, plus 10 to 15 m for the outlet pressure you want, plus about 20 percent for friction.
3. Read the curve. Pick a pump that delivers your flow at your head, not one that only hits the head at zero flow.
4. Match the phase. Single-phase covers most homes. Three-phase is normal above 3 HP.
Hydromo’s pressure pump range includes the CMBE Compact Water Pressure Booster for households, the CMBE TWIN Parallel Booster for light commercial use, and the Hydro Multi-E energy-efficient boosting sets. Match the model to your flow and head, not to the HP.
One mistake we see often: people buy a booster to fix a problem that is actually a choked pipe or a half-open valve. Check the supply line first. A ₹300 fix beats a ₹15,000 pump.
Get a quote based on your flow and head.
If you’re comparing quotes, ask each supplier for the flow and head at your duty point, not only the HP. For apartments, hospitals, and commercial buildings, Hydromo designs pressure boosting systems alongside its sewage treatment plant and water treatment work. Request a Free Site Assessment and we will size the pump to your building, not to a catalogue number.
Frequently asked questions
How much does a pressure booster pump cost in India?
A household pressure booster pump costs ₹5,000 to ₹28,000. Commercial and apartment booster sets cost ₹1.5 lakh to ₹8 lakh or more, depending on flow, head and controls.
What is the 1 HP booster pump price in India?
The 1 HP booster pump price in India ranges from about ₹3,000 for basic models to ₹28,000 for branded units with a tank, stainless steel parts and dry-run protection.
Is the booster pump price different in Telangana?
No. MRP is the same nationwide. Local factors like GST, dealer discounts, transport and installation set your final cost.
Which is better, a 0.5 HP or a 1 HP booster pump?
A 0.5 HP pump suits one or two bathrooms on the same floor. Choose 1 HP for three or more bathrooms, long pipe runs or upper floors. Always check the flow-head curve.
Can a booster pump draw directly from the municipal line?
Many municipal bodies restrict direct suction because it can starve neighbours. Pump from a sump or storage tank where possible, and check your local water board rules.
How long does a booster pump last?
Expect 5 to 8 years for a good household unit and 10 years or more for a well-maintained stainless steel multistage set. Hard water and dry running shorten that.